Alumaweld boats
Alumaweld builds welded aluminum fishing boats and utility skiffs. With 2078 registered US hulls (median 16 ft), the brand appeals to freshwater anglers and commercial operators who prioritize durability over performance. Most surviving hulls date from the early to mid 1990s.
Are Alumaweld boats reliable?
Welded aluminum construction resists corrosion better than fiberglass, keeping long term costs lower in harsh environments. The brand has 8 USCG recalls on record (primarily fuel systems and flotation), so verify recall compliance during inspection. Outboard replacement and trailer maintenance typically drive the largest ownership costs on these older boats.
Common problems to inspect on a used Alumaweld
- Welds and seams at transom and hull joints for cracks or corrosion
- Fuel system components including tanks, lines, and vents for recall issues
- Rivets and fasteners for loosening or galvanic corrosion
- Deck and floor for soft spots or water intrusion
Registry footprint
Sample = US state open-data vessel registries (currently Texas + New York, ~875k vessels). Treat as a representative slice of recreational US inventory.
Recalls (8)
- ⚠ Recall
920364S9/17/1992LEVEL FLOTATION; LEVEL FLOTATION STABILITY
What this means before you buy → - ⚠ Recall
920365S8/12/1992LEVEL FLOTATION STABILITY; HORSEPOWER
What this means before you buy → - ⚠ Recall
19CG155S6/28/2019LEVEL FLOTATION
What this means before you buy → - ⚠ Recall
920358S5/14/1993LEVEL FLOT W/REMOTE STRG; LEVEL FLOT STAB W/REMOTE
What this means before you buy → - ⚠ Recall
920349S5/14/1992LEVEL FLOTATION; LEVEL FLOTATION STABILITY
What this means before you buy → - ⚠ Recall
800101S4/4/1980NONCOMPLIANCE; LEVEL FLOTATION
What this means before you buy → - ⚠ Recall
041025R112/19/2005LABEL; CAPACITY
What this means before you buy → - ⚠ Recall
920351S10/9/1992LEVEL FLOTATION; LEVEL FLOTATION STABILITY
What this means before you buy →
USCG MIC entries (1)
Frequently asked questions
Are Alumaweld boats reliable?
Welded aluminum construction provides excellent corrosion resistance and structural durability, though buyers should verify USCG recall compliance (8 recalls on record) and inspect welds and fuel systems carefully.
What size Alumaweld boats are most common?
The median registered hull is 16 ft, with most boats in the 14 to 18 ft range for fishing and utility use.
What are common problems with used Alumaweld boats?
Inspect welds and seams for cracks, verify fuel system recall compliance, check fasteners for galvanic corrosion, and test decks for soft spots. Most issues stem from age and maintenance rather than design flaws.
What should I look for when buying a used Alumaweld?
Focus on weld integrity at the transom and hull joints, verify all USCG recalls have been addressed, inspect the fuel system thoroughly, and check for galvanic corrosion on fasteners and hardware.
Looking at a specific Alumaweld?
Paste the listing URL and we'll cut a full Deal Report — fair value, comp set, engine risk, ownership cost, inspection checklist, negotiation script. $49, written by an independent analyst.
Get the Deal Report →