Bonita Springs Fibergl recalls
Bonita Springs Fibergl boats have 1 recall campaign on record across 3 reported units. Below is every campaign, what it covers, and how to confirm a specific hull was fixed before you buy.
Bonita Springs Fibergl has one recorded recall with the U.S. Coast Guard, campaign 800290S from November 1980, affecting just 3 boats across all models. The recall addressed missing or incorrect HIN capacity and certification labels, a compliance issue rather than a safety defect in the hull or systems. For a used buyer today, this decades old labeling recall presents minimal concern, though verifying the remedy was applied remains good practice.
All Bonita Springs Fibergl recalls
- ⚠ Recall
800290S11/11/1980HIN- CAPACITY AND; CERTIFICATION LABEL
What this means before you buy →
What to check before you buy a used Bonita Springs Fibergl
- Decode the HIN to confirm the boat's manufacture date and check if it falls within the November 1980 recall window.
- Inspect the capacity plate and certification label for correct placement and legibility, as the recall required proper labeling.
- Request documentation or surveyor notes confirming the labeling remedy was completed if the boat was among the 3 affected units.
- Prioritize a full marine survey focused on structural integrity and mechanical systems, as the single historic recall was administrative rather than safety critical.
Frequently asked questions
How many Bonita Springs Fibergl boats have been recalled?
Only 3 boats were recalled in a single 1980 campaign (800290S) related to HIN capacity and certification label compliance. No other recalls are on record with the Coast Guard.
What was the Bonita Springs Fibergl recall about?
The November 1980 recall addressed missing or incorrect HIN, capacity, and certification labels required by federal regulations. It was a documentation and compliance issue, not a structural or mechanical defect.
Should I worry about the 1980 Bonita Springs Fibergl recall when buying used?
The risk is very low given the recall affected only 3 boats over 45 years ago and involved labeling rather than safety systems. Verify the labels are present and legible during your survey.
How do I check if my Bonita Springs Fibergl boat was part of the recall?
Decode the HIN to confirm the manufacture date aligns with November 1980 and cross reference the model against the "all models" scope of campaign 800290S. A marine surveyor can assist with HIN interpretation and label inspection.