Custom Fiberglass Molding recalls
Custom Fiberglass Molding boats have 1 recall campaign on record across 3 reported units. Below is every campaign, what it covers, and how to confirm a specific hull was fixed before you buy.
Custom Fiberglass Molding Inc has one recall on USCG record, campaign 03V035S from October 2004, addressing a basic flotation deficiency in HUNTER model boats. The campaign affected 3 units and involved level flotation compliance. While the affected population is small and the issue dates to 2004, any used Custom Fiberglass Molding Inc buyer should verify whether their hull was part of this campaign and confirm remedy completion.
All Custom Fiberglass Molding recalls
- ⚠ Recall
03V035S10/13/2004BASIC FLOTATION; LEVEL FLOTATION
What this means before you buy →
What to check before you buy a used Custom Fiberglass Molding
- Cross reference your boat's HIN against USCG campaign 03V035S to determine if your hull was among the 3 units affected.
- If your boat was included in the recall, request written documentation from the seller proving the flotation remedy was completed by a qualified technician.
- Have a marine surveyor inspect the flotation system during prepurchase survey, particularly on HUNTER models from the early 2000s era.
- Contact Custom Fiberglass Molding Inc or the USCG recall database directly with your HIN if you cannot confirm remedy status through the seller.
Frequently asked questions
How many recalls has Custom Fiberglass Molding Inc had?
Custom Fiberglass Molding Inc has one recall on USCG record, campaign 03V035S issued in October 2004 for a flotation deficiency affecting 3 HUNTER model boats.
Which Custom Fiberglass Molding Inc models were recalled?
The single recall campaign 03V035S affected HUNTER model boats only. The campaign involved 3 units with basic flotation and level flotation issues.
What was wrong with the recalled Custom Fiberglass Molding Inc boats?
Campaign 03V035S addressed a basic flotation deficiency and level flotation compliance issue. Proper flotation is a critical safety system that keeps a swamped boat afloat.
Should I avoid buying a used Custom Fiberglass Molding Inc boat because of recalls?
The single 2004 recall affected only 3 HUNTER model boats, a very small population. Verify your specific hull was not part of the campaign or confirm the remedy was completed, then make your decision based on overall condition and survey findings.