Glastex recalls
Glastex boats have 1 recall campaign on record across 78 reported units. Below is every campaign, what it covers, and how to confirm a specific hull was fixed before you buy.
Glastex Co has one safety recall on record with the U.S. Coast Guard, issued in May 1981 for 78 units across four models due to a missing blower warning label. This labeling defect does not indicate a design or structural flaw, but used buyers should verify whether their boat was affected and if the required label was applied as part of the remedy.
All Glastex recalls
- ⚠ Recall
810092S5/20/1981NO BLOWER LABEL
What this means before you buy →
What to check before you buy a used Glastex
- Check your hull identification number against recall campaign 810092S if your boat is a V 680, T 681, T 886, or V 20 model from the late 1970s or early 1980s
- Inspect the blower area for the presence of a proper warning label that alerts operators to ventilation procedures before starting the engine
- Request documentation from the seller showing the recall remedy was completed, or contact a marine surveyor to verify compliance during pre purchase inspection
- Understand that the absence of this label does not make the boat unsafe to operate, but proper ventilation before engine start is critical to prevent fuel vapor ignition
Frequently asked questions
How many Glastex Co boats have been recalled?
The U.S. Coast Guard has issued one recall for Glastex Co, affecting 78 units built in the late 1970s or early 1980s. The recall addressed a missing blower warning label, not a mechanical or structural defect.
What was the Glastex Co recall for?
The May 1981 recall (campaign 810092S) addressed the absence of a blower warning label on four models: V 680, T 681, T 886, and V 20. The label is required to instruct operators on ventilation procedures before starting the engine to prevent fuel vapor accumulation.
Is a 1980s Glastex Co boat safe to buy?
A single labeling recall from 1981 does not indicate broader safety or quality concerns with Glastex Co boats. Verify the blower label is present or ensure you follow proper ventilation procedures, and have any used boat inspected by a qualified marine surveyor before purchase.
How do I know if my Glastex Co boat was recalled?
Decode your hull identification number to confirm the model and build year, then cross reference it with recall campaign 810092S, which affected V 680, T 681, T 886, and V 20 models. A marine surveyor or the current owner's documentation may also confirm whether the remedy label was applied.