Marinetech Products Inc Of White Bear Lake Minn recalls
Marinetech Products Inc Of White Bear Lake Minn boats have 1 recall campaign on record across 450 reported units. Below is every campaign, what it covers, and how to confirm a specific hull was fixed before you buy.
Marinetech Products Inc Of White Bear Lake Minn has one recorded USCG recall, issued in July 2009 for tabletop rope cutters sold under the Panther brand. The recall affected 450 units of a marine accessory tool, not boats themselves. Buyers of used boats should verify whether any rope cutting equipment included with the purchase matches the recalled part numbers.
All Marinetech Products Inc Of White Bear Lake Minn recalls
- ⚠ Recall
097472009-07-01The recalled tabletop rope cutters are used for cutting and cauterizing rope. This recall includes MarineTech part number 75-7070 and West Marine part number 559419. The Marine Tech part number is located on the side of the rope cutter. "Panther" is printed on the rope cutter.
What to check before you buy a used Marinetech Products Inc Of White Bear Lake Minn
- Inspect any rope cutting tools that came with a used boat for MarineTech part number 75 7070 or West Marine part number 559419.
- Look for the Panther brand name printed on the rope cutter body and the MarineTech part number on the side.
- Contact the seller or previous owner to confirm whether the recalled rope cutter was replaced or if the remedy was completed.
- Given the 2009 recall date, verify the current condition and safe operation of any rope cutting equipment before use.
Frequently asked questions
Has Marinetech Products recalled any boats?
No, Marinetech Products Inc has not recalled boats. The single USCG recall from 2009 involved tabletop rope cutters, a marine accessory tool.
What Marinetech Products were recalled?
In July 2009, Marinetech recalled 450 units of tabletop rope cutters sold as part number 75 7070, also sold through West Marine as part number 559419 under the Panther brand.
How do I identify a recalled Marinetech rope cutter?
Check the side of the rope cutter for MarineTech part number 75 7070 or look for West Marine number 559419. The word Panther should be printed on the cutter body.
Should I be concerned about a 2009 Marinetech recall when buying a used boat?
The recall applies only to a specific rope cutting tool, not the boat itself. If the boat includes this accessory, verify the part number and confirm whether the remedy was applied or the tool was replaced.