Sebrich Craft recalls
Sebrich Craft boats have 1 recall campaign on record across 3 reported units. Below is every campaign, what it covers, and how to confirm a specific hull was fixed before you buy.
Sebrich Craft has one recorded recall in the USCG database, issued in September 1982 for flotation defects on 15.15 ft outboard models. The campaign affected just 3 units and involved missing compliance plates. For buyers considering a used Sebrich Craft, this 40 year old recall presents minimal risk unless you are evaluating a 1982 era 15 footer.
All Sebrich Craft recalls
- ⚠ Recall
820120S9/24/1982FLOTATION; NO PLATE
What this means before you buy →
What to check before you buy a used Sebrich Craft
- Decode the HIN to confirm the model year and check whether your boat falls within the affected 1982 production window.
- Inspect for the presence of a manufacturer compliance plate, as the recall cited missing plates on affected units.
- Have a marine surveyor verify flotation integrity during the prepurchase inspection, especially on older outboard models.
- Request documentation from the seller showing any remedial work or confirmation that the flotation system meets current safety standards.
Frequently asked questions
How many recalls has Sebrich Craft had?
Sebrich Craft has one recorded recall in the USCG database, issued in 1982 for flotation issues on 15.15 ft outboard models affecting 3 units.
Which Sebrich Craft models were recalled?
The 1982 recall applied to 15.15 ft outboard models. Only 3 units were affected by the flotation and compliance plate defect.
What was the Sebrich Craft recall for?
The September 1982 recall addressed flotation defects and missing manufacturer compliance plates on a small run of 15 foot outboard boats.
Should I be concerned about Sebrich Craft recalls when buying used?
The single recall is over 40 years old and affected only 3 boats. Unless you are buying a 1982 era 15 footer, the recall history presents negligible risk, though a prepurchase survey is always prudent.